Sign In | Join Free | My webtextiles.com
China SUNSHINE RFID Technology Co.,Limited logo
SUNSHINE RFID Technology Co.,Limited
PROFESSIONAL RFID SOLUTION
Active Member

9 Years
Home > 4 Port RFID Reader >

UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip

Product Categories
SUNSHINE RFID Technology Co.,Limited
Contact Now

UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip

Brand Name : sunshine

Model Number : F5860

Certification : CE,ROSH

Place of Origin : CHINA

MOQ : 1

Payment Terms : T/T, Western Union

Packaging Details : Carton

Tag Protocol : EPCglobal UHF Class 1 Gen 2/ISO 18000-6C

Working Frequency : 840～960MHz

Communication Interface : USB、RS232、RS485、Ethernet

Antenna interface : Four TNC

GPIO interface : 3-Road GPIO can only input can not be input，GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer

Supporting Working Area : China, Europe, the United States, South Korea, Japan, Taiwan……

Maximum operating current : 1A

Contact Now

840~960 Mhz Impinj R2000 UHF Fixed Four Port RFID Reader Stm32 Main Control Chip

Product Description

  • F5860-H is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc..


Technical parameters

Name Parameters Remark
Reader Chip R2000
Tag Protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency 840～960MHz
Supporting Working Area China, Europe, the United States, South Korea, Japan, Taiwan……
Operating Voltage 12V DC power supply
Maximum operating current 1A Test of transmit power in 30dBm state
Standby current ≤80mA
RF port maximum output power 1W(30dBm)
Working Temperature -25℃～+65℃
Working Humidity ≤95%(+25℃)
Storage Temperature -40℃～+80℃
Receiving -82dBm
Antenna interface impedance 50Ω
Serial communication parameters Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1
Power output settings 5～30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm)
DRM mode support
RSSI support
High temperature automatic protection function support
Power supply enable support
GPIO interface

3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer
buzzer support
LED lights

Power indicator: Red
Status indicator: Green
Communication Interface USB,RS232,RS485,Ethernet Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time.
Antenna interface Four TNC The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time.
dimension 26.5*25.0*4.5CM(including bracket)
Accessories

12V/3A Power Adapter:1
Serial line: 1 root



PIN Green Terminal Interface Definition

Pin NO. Name Description Remark
1 485-B RS485 B
2 485-A RS485 A
3 EN_OUT Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V.
4 GPIO1 GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V)
5 GPIO2 the same as above
6 GPIO3 the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control)
7 NC Reserved interface, no function
8 NC Reserved interface, no function
9 WIFI_RESET Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.
10 GND Signal reference.


UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip
UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip

Service
1. Any inquiries will be replied within 24 hours.
2. Professional manufacture.Welcome to visit our website:www.cmrfid.com.
3. OEM/ODM available:
4. High quality,fashion designs,reasonable & competitive price,fast lead time.
5. After-sale Service:
1). All products will have been strictly Quality Checked in house before packing.
2). All products will be packed for shipping.
6. Faster delivery:
5-12days for bulk production.
7. Payment:
You can pay for the order via:T/T,L/C,Western Union.


Product Tags:

multi tag rfid reader

      

fixed uhf rfid reader

      
Quality UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip for sale

UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: SUNSHINE RFID Technology Co.,Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like